|
At 5,000 watts, the Industrial Grade Modified Sine Wave Power Inverter promises to be a complete solution for any power need you present. From recreation to industrial applications and backup/emergency power needs, this 5,000 watt modified sine wave inverter delivers enough durable power for high end equipment that requires substantial electricity. This digitally outputted and phase corrected inverter is the recommended power solution for reliable output without noise or distortion and has a higher heat tolerance. Delivering an incredible 5,000 watts of continuous power, this utility-grade inverter was designed to reproduce the quality of electricity provided by power companies to create a stable AC power source. This inverter supplies ample power for long periods of time, to run large pumps, compressors, power tools, multiple appliances, job sites and even a small house! It has PWM programming which corrects any fluctuation in voltage or frequency caused by battery fluctuation or sudden surges in power usage. It also has a longer than average surge time (9 seconds when over 5,000 watts).
Specifications for the AIMS PWRIG5000W 5000 Watt Industrail Grade Modified Sine Wave Power Inverter:- Continuous output power: 5000 Watts
- Surge power capability (peak power): 10,000 Watts The surge duration is electronically controlled and permits up to 9 seconds while the output is between 5000 and 10,000 watts. During this time the buzzer will sound until the inverter electronically shuts down.
- Starts equipment that requires up to 83 ac amps.
- Modified sine wave with pulse width modulation that improves sine wave
- Power switch LED is also a self test light - Green
- Overload fail LED - Red
- Overload and over temperature LED indicators
- 1 direct connect ac terminal block
- 2 ac receptacles. Additional outlets may be added using a separate spliter
- On/off switch
- Over temperature protection
- Overload protection
- Thermally controlled fan
- DC volt meter - Input meter
- Percent load usage LED bar
- 5 Externally located re-settable circuit breakers (60amp)
- ac output short circuit protection
- Aluminum case for optimal cooling
- Pre-wired for remote on/off switch
- Pre-slotted mounting plate
- Instruction manual
- Free 1 year tech support
- 1 Year Warranty Parts and Labor
- dc input / operating voltage: 10-16 Volts
- Output voltage: 110 Volts ac +/- 10%
- Output wave form: modified sine wave with phase correction
- Output frequency: 60 Hz +/- 1 Hz
- Battery low voltage alarm: 20 +/- 0.5 Volts
- Battery low voltage shutdown: 19.5 +/- 0.5 volts
- High input voltage protection 34 +/-0.5 volts
- No load current: .40 dc amps with switch in the on position
- Full load efficiency: 90%
- Auto Cooling Fan Start at 113 degrees F
- Full load maximum operating temperature: 160 degrees F
- AC Output Socket Type: dual Type 2 -3 prong
- Internal fuse protection
- Product size (D x W x H): 26L x 9.5W x 5.5H
- Weight: 28 lbs
- UL maximum recommended per outlet 1500W
|
