|
At 3,000 watts, the Industrial Grade Modified Sine Wave Power Inverter promises to be a complete solution for any power need you present. From recreation to industrial applications and backup/emergency power needs, this 3,000 watt modified sine wave inverter delivers enough durable power for high end equipment that requires substantial electricity. This digitally outputted and phase corrected inverter is the recommended power solution for reliable output without noise or distortion and has a higher heat tolerance. Delivering an incredible 3,000 watts of continuous power and a 6,000 watt surge, this utility-grade inverter was designed to reproduce the quality of electricity provided by power companies to create a stable AC power source. This inverter supplies ample power for long periods of time, to run large pumps, compressors, power tools, multiple appliances, job sites and even a small house! It has PWM programming which corrects any fluctuation in voltage or frequency caused by battery fluctuation or sudden surges in power usage. It also has a longer than average surge time of 9 seconds when operating in the 5,000-6,000 watt range. This inverter will start large equipment that requires up to 50 ac amps during start up.
Specifications for the AIMS PWRIG300012W 3000 Watt Industrial Grade Modified Sine Wave Power Inverter:- 3000W max continuous power with 6,000W surge for 9 seconds. The surge duration is electronically controlled and permits up to 9 seconds while the output is between 3000 and 6,000 watts. During this time the buzzer will sound until the inverter electronically shuts down. 25 ac amps, 250 dc amps
- Modified sine wave with pulse width modulation
- Power switch LED is also a self test light - Green
- Overload fail LED - Red
- Overload and over temperature LED indicators
- 1 direct connect ac terminal block
- 2 ac receptacles. Additional outlets may be added using a separate spliter
- On/off switch
- Over temperature protection
- Overload protection
- Thermally controlled fan
- DC volt meter - Input meter
- Percent load usage LED bar
- 5 Externally located re-settable circuit breakers (60amp)
- ac output short circuit protection
- Aluminum case for optimal cooling
- Pre-wired for remote on/off switch
- Pre-slotted mounting plate
- Instruction manual
- Free 1 year tech support
- 1 Year Warranty Parts and Labor
- dc input / operating voltage: 10-16 Volts
- Output voltage: 110 Volts ac +/- 10%
- Output wave form: modified sine wave with phase correction
- Output frequency: 60 Hz +/- 1 Hz
- Battery low voltage alarm: 10 +/- 0.5 Volts
- Battery low voltage shutdown: < 10 +/- 0.5 Volts
- High input voltage protection 18 +/-0.5 volts
- No load current: .40 dc amps with switch in the on position
- Full load efficiency: 90%
- Auto Cooling Fan Start at 113 degrees F
- Full load maximum operating temperature: 160 degrees F
- AC Output Socket Type: dual Type 2 -3 prong
- Internal fuse protection
- Product size (D x W x H): 24L x 9W x 3H
- Weight: 15 lbs
- UL maximum recommended per outlet 1500W
|
